Ambisonics Testing Audios » 1storder Ambisonics Clock Test (voice + white noise)

来源: Freesound 前往原页面 查看译文
作者:clucs
许可:CC-BY 保留署名许可协议  
描述:This is a synthesised 1st order Ambisonics test file. The exchange format is: SN3D normalisation with ACN channel order. A recorded voice says each hour clockwise in the respective positions as if the listener is located in the center of a huge horizontal clock, and looking at the location of the hour number 12. A white noise follows each spoken word, and four additional noise signals are played in four positions near to the top of the sphere. This test audio uses sounds from the pack "Numbers 020" by tim.kahn( http://freesound.org/people/tim.kahn ) This test audio was generated using Ambiscaper by andresperezlopez( https://github.com/andresperezlopez/ambiscaper )
标签: 3D Check Voice 3Dsound Test Spatial Processed Ambisonics Testing Ambisonic Clock Noise Bformat
音频格式wav
声音时长00:25
文件大小9.2 MB
比特率3087 kbps
采样率48000 Hz
位深度16 bit
声道立体声
音频蛋下载 推荐

◦  支持一键下载
◦  智能提速线路
◦  队列批量下载
◦  免费跨站下载

  加入任务队列
原站点下载 备用

◦  账户登录下载
◦  普通站点线路
◦  单个文件下载
◦  免费站内下载

  前往声音页面

———— 类似的声音 ————

来源Freesound
描述:这是一个合成的双耳测试文件。 录制的声音表示在相应位置顺时针方向每小时,好像收听者位于巨大水平时钟的中心,并查看小时数12的位置。每个说出的单词后面都有白噪声,还有四个额外的噪声信号在靠近球体顶部的四个位置进行。 这个测试音频使用tim.kahn(http://freesound.org/people/tim.kahn)的“数字020”包中的声音 此测试音频由AndrésPérezLópez使用Ambiscaper生成(https://github.com/andresperezlopez/ambiscaper) 此测试音频由Matthias Kronlachner使用ambiX生成(http://www.matthiaskronlachner.com/?p2015)
来源Freesound
描述:这是一个合成的5阶Ambisonics测试文件。交换格式为:使用ACN信道顺序进行SN3D标准化。 录制的声音表示在相应位置顺时针方向每小时,好像收听者位于巨大水平时钟的中心,并查看小时数12的位置。每个说出的单词后面都有白噪声,还有四个额外的噪声信号在靠近球体顶部的四个位置进行。 这个测试音频使用tim.kahn(http://freesound.org/people/tim.kahn)的“数字020”包中的声音 此测试音频是由andisperezlopez使用Ambiscaper生成的(https://github.com/andresperezlopez/ambiscaper)
来源Freesound
描述:这是一个合成的4阶Ambisonics测试文件。交换格式为:使用ACN信道顺序进行SN3D标准化。 录制的声音表示在相应位置顺时针方向每小时,好像收听者位于巨大水平时钟的中心,并查看小时数12的位置。每个说出的单词后面都有白噪声,还有四个额外的噪声信号在靠近球体顶部的四个位置进行。 这个测试音频使用tim.kahn(http://freesound.org/people/tim.kahn)的“数字020”包中的声音 此测试音频是由andisperezlopez使用Ambiscaper生成的(https://github.com/andresperezlopez/ambiscaper)
来源Freesound
描述:这是一个合成的3阶Ambisonics测试文件。交换格式为:使用ACN信道顺序进行SN3D标准化。 录制的声音表示在相应位置顺时针方向每小时,好像收听者位于巨大水平时钟的中心,并查看小时数12的位置。每个说出的单词后面都有白噪声,还有四个额外的噪声信号在靠近球体顶部的四个位置进行。 这个测试音频使用tim.kahn(http://freesound.org/people/tim.kahn)的“数字020”包中的声音 此测试音频是由andisperezlopez使用Ambiscaper生成的(https://github.com/andresperezlopez/ambiscaper)
来源Freesound
描述:这是一个合成的二阶Ambisonics测试文件。交换格式为:使用ACN信道顺序进行SN3D标准化。 录制的声音表示在相应位置顺时针方向每小时,好像收听者位于巨大水平时钟的中心,并查看小时数12的位置。每个说出的单词后面都有白噪声,还有四个额外的噪声信号在靠近球体顶部的四个位置进行。 这个测试音频使用tim.kahn(http://freesound.org/people/tim.kahn)的“数字020”包中的声音 此测试音频是由andisperezlopez使用Ambiscaper生成的(https://github.com/andresperezlopez/ambiscaper)
来源Freesound
描述:电机伺服3d打印机3d刀具工业机器人机械机械工厂声学 用手持记录仪记录三维刀具的各种动作。
来源Freesound
描述:男声尖叫声。用Cool Edit 96应用的3D回声效果。
来源Freesound
描述:记录的3d打印机
来源Freesound
描述:PrintrBot简单打印3D。
来源Freesound
描述:记录PrintrBot简单3D打印。
来源Freesound
描述:旋转(3D)白噪声(双耳)
来源Freesound
描述:肌动蛋白的3D激光 Sintern打印机