NoisyXModOscillators

来源: Freesound 前往原页面 查看译文
作者:zimbot
许可:CC-BY 保留署名许可协议  
描述:Demo of a range of various sounds from crossmodulating two sine waves. This is a demonstration of a noise production technique this sound is not likely to be particularly useful on its own, though you may find certain sections to be good source material for further processing toward some goal. This is noise produced by crossmodulating two sine wave oscillators, with both frequency and amplitude modulation used, plus a variable delay in the frequency modulation that is varied by a lowpass filtered product of the outputs. This is as opposed to using a white noise (random) source and then modifying its output (especially with filters) here, no random noise source is employed. The two oscillators feed the left and right channel, but a certain amount of a composite signal is mixed into both to form a solidifying center that center signal is taken from the product of the two and simply filtered with a 9sample moving average. During the production of this (rather long) sound, I varied certain parameters, namely the center frequency and the spread of each oscillator's frequency modulation. You can hear the wide range of differences possible. For one section where the pitch is relatively high (still with lowfrequency rumble), I tightened the spread of modulation considerably to get a very tonal sound. I find the result surprising and interesting. It is almost like the kind of "wind noise" or turbulence you get from rushing air across different types of surfaces, reminiscent of aircraft hull noise or teakettle singing, but at low frequencies it can be indistinguishable from a infinite number of "rumble" sources. There are some screen shots that might be of interest (and the actual circuit) at this page in the abox2 google group forum, but I honestly don't know if you need to join the group before you can see that forum discussion.
标签: abox2 experimental demonstration generation oscillator modulation noise
音频格式wav
声音时长02:51
文件大小28.9 MB
比特率1413 kbps
采样率44100 Hz
位深度16 bit
声道立体声
音频蛋下载 推荐

◦  支持一键下载
◦  智能提速线路
◦  队列批量下载
◦  免费跨站下载

  加入任务队列
原站点下载 备用

◦  账户登录下载
◦  普通站点线路
◦  单个文件下载
◦  免费站内下载

  前往声音页面

———— 类似的声音 ————

来源Freesound
描述:在NoisyXModOscillators.wav中更完整地描述了从相同电路/技术中获取的深度噪声的无缝环(请参见该描述)。在这种情况下,参数在低频率下保持稳定,具有适度的调制范围(扩展)。我把输出带到Cool Edit Pro只是为了让它成为一个无缝循环。否则,它是未经修改的,直接来自生成它的模拟盒电路。 在abox2 google小组论坛的这个页面上有一些可能感兴趣的屏幕截图(以及实际的电路),但老实说我不知道​​你是否需要加入小组才能看到论坛讨论。
来源looperman
描述:一个装有CD的盒子,放在一个转盘上,你可以用它来划动。
来源Freesound
描述:一个快速的示范,可以使用Audacitys的噪音生成和包络功能从头开始创建流行和砰砰声。要求http://www.freesound.org/forum/viewtopic.php?t13649
by vumseplutten1709
来源Freesound
描述:由Cliff Master记录在火星上。从来没有听说过什么?难怪,这是我的新一代声音。
by maqsood5@mail2world.com
来源Freesound
描述:但是New GenerationPoet:Maqsood HasniVoice:Maqsood HasniFree abuzar电子书屋。 2017年
来源Freesound
描述:枪射击数学宏振荡器可变辫子仪器使噪声声音环境自然周围场记录环境氛围噪声磨砂科幻脉冲 环境foley录音和实验声音设计。
2a
by deleted_user_2195044
来源Freesound
描述:用振荡器和(或)修改过的(处理过的)样本生成。
by deleted_user_2195044
来源Freesound
描述:用振荡器和(或)修改过的(处理过的)样本生成。
by deleted_user_2195044
来源Freesound
描述:用振荡器和(或)修改过的(处理过的)样本生成。
by deleted_user_2195044
来源Freesound
描述:用振荡器和(或)修改过的(处理过的)样本生成。
by deleted_user_2195044
来源Freesound
描述:用振荡器和(或)修改过的(处理过的)样本生成。
by deleted_user_2195044
来源Freesound
描述:用振荡器和(或)修改过的(处理过的)样本生成。
来源Freesound
描述:连续体的一部分(永无止境的合作项目).
by gis_sweden
来源Freesound
描述:Alien XXX给我发了一个“交叉调制挑战”。我试图忠实于他的想法,但可以说增加了自动化。 振荡器1始终是fm调制振荡器2。我用LFO改变振荡器1的频率。振荡器1的输出被发送到a)左音频通道,b)输入到振荡器2。 振荡器2的输出馈送到振荡器1。交叉fm调制的程度由另一个LFO控制的VCA控制。振荡器2的输出也被发送到右声道。 在我写这篇文章时,我刚刚在一张纸上做了理论补丁。结果就是你所听到的。没有添加效果。直接从模块中取出更好或更差。
by deleted_user_2195044
来源Freesound
描述:用振荡器和(或)修改过的(处理过的)样本生成。