Colorino Talking Color Identifier and Light Probe » Colorino light probe, DirecTV remote Infrared light, to box, then to Sanyo

来源: Freesound 前往原页面 查看译文
作者:kb7clx
许可:CC-BY 保留署名许可协议  
描述:Pointing the Colorino and my DirecTV remote at each other. the modulated light sounds similar to what you hear when you put a remote near an AM radio to hear it's processor. Yes, it does pick up near infrared light, and even will react to a space heater. I'll upload the AM radio bit at a later date. Pressing buttons to control the DirecTV box, then at the end I pressed the volume buttons which makes the remote talk to the old Sanyo TV. It's a bit of a trick getting the units lined up perfectly, so the pitch will vary. I made it do that anyway to give you a good example of what it sounds like at many different light levels.the Colorino Talking Color Identifier and Light Probe produces a tone when you hold down the light probe button. It's a pocket sized 2in1 unit, which is a Color Identifier/Light Detector for the blind and colorblind. The stronger the light source, the higher the pitch. The more light it receives, the higher the pitch. So you can vary the pitch by moving and turning it.Recorded from linein on my desktop using Goldwave. Lowpass filter was applied to lock out the 16khz sampling frequency.
标签: experimental playing bursty bursts tacktacktack fm tvremote modulatedlight modulation noise frequencymodulation chattering digital lighttosound Assistivetechnology remotecontrol colordetector electronic lightprobe accessibility colorblind blind
音频格式wav
声音时长00:29
文件大小5 MB
比特率1425 kbps
采样率44100 Hz
位深度16 bit
声道立体声
音频蛋下载 推荐

◦  支持一键下载
◦  智能提速线路
◦  队列批量下载
◦  免费跨站下载

  加入任务队列
原站点下载 备用

◦  账户登录下载
◦  普通站点线路
◦  单个文件下载
◦  免费站内下载

  前往声音页面

———— 类似的声音 ————

by lorenzosu
来源Freesound
描述:罗马除夕夜的烟花。大部分在背景中,但附近有一些响亮的爆裂声。爆炸的时间稍长,数量较少。用H4和内部话筒录制
by SintheticRecords
来源looperman
描述:这是一个非常短的合成器,是我在玩一个新的vsti时随机创建的。
by lorenzosu
来源Freesound
描述:罗马除夕夜的烟花。大部分在背景中,但附近有一些响亮的爆裂声。用H4和内部话筒录制
来源Freesound
描述:将Colorino和我的DirecTV遥控器指向对方。当您将遥控器放在AM收音机附近听到它的处理器时,调制光的声音类似于您听到的声音。是的,它确实接近红外线,甚至会对空间加热器做出反应。我将在以后上传AM无线电位。反复按音量按钮,使远程通话与旧的三洋电视。这听起来与Sanyo遥控器有点不同,开头有一个快速的DirecTV昙花一现,也许告诉DirecTV盒子忽略下一个命令“我现在要和Sanyo谈谈”。让单位完美排列是一个小技巧,所以音高会有所不同。无论如何,我做到了这一点,为您提供一个很好的例子,说明它在许多不同的光线水平下的声音。当您按住光探测按钮时,Colorino会说话的颜色标识符和光探测器会产生一种音调。它是一个口袋大小的二合一单元,是盲人和彩色盲人的颜色识别器/光探测器。光源越强,音高越高。收到的光越多,音高越高。因此,您可以通过移动和转动来改变音高。使用Goldwave从我的桌面上的线路输入进行修改。应用低通滤波器锁定16khz采样频率。
来源Freesound
描述:将Colorino和遥控器指向我21岁的三洋CRT彩色电视机并按下遥控器上的不同按钮。检测红外线没有问题。稍微改变角度会使音调产生差异。它们必须在相当近的范围内相互指向。当您按住光探针按钮时,Colorino会说话的颜色标识符和光探针会产生一种音调。它是一个口袋大小的二合一单元,是盲人和彩色盲人的颜色识别器/光探测器。光源越强,音高越高。收到的光越多,音高越高。因此,您可以通过移动和转动来改变音高。使用Goldwave从我的桌面上的线路输入进行修改。应用低通滤波器锁定16khz采样频率。
来源Freesound
描述:播放
Tag: MIDI
来源Freesound
描述:使用遥控器播放我21岁的三洋彩色CRT电视和一个用于DirecTV盒子的遥控器,该盒子将与三洋通过音量控制和& amp;关闭。我终于让他们都指着光探头发出类似水平的光线,并设法同时按下所有3个按钮。我玩了一下,让他们互相节奏,可以说。当你按住光探头按钮时,Colorino会说话的颜色标识符和光探测器产生一种音调。它是一个口袋大小的二合一单元,是盲人和彩色盲人的颜色识别器/光探测器。光源越强,音高越高。收到的光越多,音高越高。因此,您可以通过移动和转动来改变音高。使用Goldwave从我的桌面上的线路输入进行修改。应用低通滤波器锁定16khz采样频率。
来源Freesound
描述:这是我用Ableton Live制作的一个合成低音循环。
来源Freesound
描述:这是我用Ableton Live制作的一个合成低音循环。
来源Freesound
描述:这是我用Ableton Live制作的一个合成低音循环。
来源Freesound
描述:一个电钻在工作中,迸发着
来源Freesound
描述:播放
Tag: MIDI
来源Freesound
描述:播放
Tag: MIDI
by oddmonolithsound
来源Freesound
描述:气溶胶喷雾的延长爆发。
来源Freesound
描述:一个电钻在工作,多处爆裂