IUT 2012 2013 » elodieduprix 2013 s2

来源: Freesound 前往原页面 查看译文
作者:iut_Paris8
许可:CC-BY-NC 非商业署名许可协议  
描述:For this second work, i have generate a whistle with an saw tooth shape; a frequence of 230 for the beginning and 1520 for the end;an interpolaire logarithmique; and all of that during 2 seconds.Then i have used of the effect inverse and changed the tempo at 5, and finally inversed the meaning of the simulation.Moreover, i've used at 2.9 of the amplification. Then, i've put the dynamic compressor at a threshold of 31dB, with a level of noise at 35dB, a ratio at 5:1, an attaque at 5,0s and finallya relaxation at 1,0s.To finish i have used of differents effects like the possibility of change the speed, the level of tool and the mixage and made. generateur de siffletforme d'onde en dent de sciefrequence : debut > 230, fin > 1520interpolaire > logarithmiquedurée > 2sec inverser changer le tempo > 5 inverser sens amplification > 2.9 compresseur dynamique > seuil : 31dBniveau de bruit : 35dBratio : 5:1attaque : 5,0srelachement : 1.0s changer la vitesse > 40 outil de niveau mixage et rendu
标签: CIM whistle sound
音频格式wav
声音时长00:01
文件大小232.7 KB
比特率1412 kbps
采样率44100 Hz
位深度16 bit
声道立体声
音频蛋下载 推荐

◦  支持一键下载
◦  智能提速线路
◦  队列批量下载
◦  免费跨站下载

  加入任务队列
原站点下载 备用

◦  账户登录下载
◦  普通站点线路
◦  单个文件下载
◦  免费站内下载

  前往声音页面

———— 类似的声音 ————

来源Freesound
描述:现在我们到了这个模拟的最后一部分。在这里,我产生了,就像第二个音轨一样,一个立体音轨。用口哨发生器,一个正弦波的形式(频率在100,结束在1000;振幅开始在0。3,结束于1),在两秒钟内有一个极间线性,我已经改变了这个路径。然后,我使用了Wahwah的乐趣。为了增加活力,我使用了从13度开始的颤音型三角琴。我在这里发现了Paulstretch的效果,我用高度的渐变来完成我的工作。 generateur de sifflet forme d'onde sinusoide frequence : debut 100, fin 1000 amplitude : debut 0.3, fin 1 interpolaire : lineaire< br> 2sec< /p> wahwah tremolo type triangle starting phase : 13 degrees paulstretch 高度的渐进变化
来源Freesound
描述:在第一次模拟的开始,我产生了一个振幅为0.3的红色布朗恩歌曲噪音,持续了一秒钟。电平工具真的很有趣,我在这个模拟中玩了一下。之后,我使用了Cross Fade Out的效果最后,我应用了一秒钟的回声,衰减系数为0.8。 Générer bruit > rouge brownien振幅0.31sec vitesse > 40 changeer hauteur > 15 高通滤波器>滚降12dB截止时间2601持续时间1秒衰减因子>0.8
来源Freesound
描述:对于第三段,我决定采用单声道乐队。然后,我第三次重复了这个压轴选择,并在上面做了一个交叉淡出。 generer risset drum 选择未进入的部分> supprimer Repeter > 3 fois 交叉淡出 durée : 1sec facteur de decroissance : 1
来源Freesound
描述:用audacity生成声音。 录音机上的声音是:生成哨子dent de scie音高41重复
来源Freesound
描述:我的第三个想法是一个警报器的声音。为了做到这一点,我在Audacity中生成了一个简短的口哨(带正弦波),我重复了4次(在第4次时,我放慢了口哨的速度)。然后,我做了一个淡出,我改变了高度的渐进变化。
来源Freesound
描述:我生成了一个"口哨"440Hz到1320Hz的正弦。然后我添加了一个效果"回声"1秒和效果"哇哈"共振频率为2.5和30哇哈
Tag: 效果 声音
来源Freesound
描述:我使用了一个名字叫做Sinusoide的哨子,频率为440,结束1320开始幅度为0.8,结束幅度为0.1。
来源Freesound
描述:锯齿形声音频率440Hz振幅0,8持续时间000 030sLFO起始相位:0深度:70;br>共振:2.5Wah频移:13
来源Freesound
描述:声音"方形"br>280Hz振幅0,5时间000 030秒起始相位:153度湿润度:40频率:4,0Hz
来源Freesound
描述:锯齿形哨音频率:290Hz /420Hz振幅:0.8至1线性插值持续时间:000 030秒
来源Freesound
描述:首先我做了一个声音(1800.5),然后我放了一个高度的变化(10到10),然后我放了一个回声,一个颤音和wahwah的0.1效果。然后我产生了一个口哨,我爆开了。这就像,对我来说,一个停止的飞机引擎,当飞行员关闭引擎着陆时。
来源Freesound
描述:我一直围绕着一个振幅为0.8的噪音,然后我添加了一个口哨和效果Wahwah我淡出直到5秒,从那里(5秒)我迸发开来。我做了一个重复4次,然后我相位到10。我最后修剪到5秒。我觉得这个声音就像风一样。
来源Freesound
描述:我用了一个dtmf音然后我加了一个停顿(1秒的片断1到2秒)。对于2到5秒的部分,我使用了一个点击轨道,我加入了一个Wahwah效果,一个回声,一个淡出和一个逐渐变化的高度。我认为这就像一个音调电话,没有人接听,当我们听到背景中的噪音(tic)时,
来源Freesound
描述:我用对数插值生成了一个从440Hz开始到1320Hz结束的口哨效果,我应用了一个"相位器"效果,然后是淡入。一个从7秒到15秒的wahwah效果,一个从15秒到20秒的tremolo效果,最后一个从21秒开始到25秒结束的淡出。
by crharvey12
来源Freesound
描述:水壶口哨声逐渐哨响